Kensight (DAS) 1911 Sights Adjustable Rear Combat Tritium Night Sights, Recessed Blade - Fits Novak LoMount Sight Dovetail CutKensight Sights
DAS - Tritium Recessed Blade is simply a night sight variation of the original DAS featuring two Trijicon 0.076" green tritium lamps. Available in green or yellow. *This sight is elevation adjustable only. Fits certain model Springfield Armory, Colt, Wilson Combat, STI International, Les Baer Custom, Rock River Arms, Dan Wesson 1911s and many others.
Novak® LoMount™ Dovetail Sight Cut
The Novak® LoMount™ dovetail is a somewhat standard dovetail sight cut found on many popular factory-fitted (OEM) and custom platforms. The Kensight® DAS™ (Defensive Adjustable Sights) and DFS™ (Defensive Fixed Sights) are the perfect low profile upgrade for your concealed carry, or combat carry pistols, due to a smooth, thoroughly "dehorned", low-profile exterior. The benefit of this feature is there are no sharp edges to cut hands or catch on clothing during the draw stroke which compliments your concealed carry or defensive style 1911. This particular sight will only fit an existing Novak® LoMount™ 1911 dovetail. If you unsure of your current dovetail configuration and would like to know more about dovetail styles, click the button below.
Add The Optional Front Sight
A front sight with dovetail dimensions of 0.330" (Width) x 65° (Angle) x 0.075" (Depth) has become known as a “standard” front sight in the industry. While these were first seen on 1911 slides with the Novak LoMount rear sight, other OEM manufactures have adopted this same size for their 1911 platform. There are two basic configurations of the “standard” front sight base. One is the “Flat Base” style and the other is the “Contoured Base”. The dovetail dimensions are both the same, so the base selection is a personal preference depending on the profile on the top of your 1911 slide. We recommend that you check your existing front sight dovetail dimensions, before purchasing the standard front sight.
DAS™ Suggested Front Sight Height
The front sight height will greatly vary depending on your rear sight selection. Most of the Kensight DAS˜ (Defensive Adjustable Sights) will require a front sight height of 0.190” - 0.200” tall. We ship most of our DAS sight sets with the recommended 0.200” tall front sight. In some cases your existing front sight may work, but this could limit the amount of elevation adjust-ability in the rear sight. If you would like to learn more about front sight heights, visit our Front Sight Height Guide.
Compatible With Many of Today's Top Manufacturers
Our sights are compatible with many factory-produced and custom 1911 pistols. The Kensight DAS and DFS line of sights will fit certain models of Springfield Armory, Colt, Wilson Combat, STI International, Les Baer Custom, Rock River Arms, Dan Wesson 1911s and many others which include the Novak LoMount Dovetail sight cut. For a complete list, See our manufactures page. Most of these manufactures offer both a target style 1911, and a carry style, which include the Novak LoMount Dovetail cut. Click on the manufacture’s Logo below to see all styles of Kensight Sights available for your particular 1911 platform.
Authentic Kensight ® Sights - The Professional's Choice
This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.
Limited Lifetime Warranty
We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.
Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.
All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.
After you obtain your RMA, Please send your product to:KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.
Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.
- Product Series:
- DAS Novak Series
- 4140 Chrome Molly Steel
- Wire-EDM Machined
- Black Oxide
- Novak Dovetail:
- 0.495" x 65° x 0.125"
- Elevation Adjustment:
- Click Adjustment
- Windage Adjustment:
- Click Adjustment
- Blade Type:
- Recessed, 0.076" Tritium Dots
- Blade Notch:
- 0.100" Deep
Kensight Tritium Sights are fantastic for low light or night shooting. Just line up the dots and pull the trigger!