Kensight Standard Fronts - Fiber Optic Blade Contoured BaseKensight Sights
This Kensight Competition Front Sight incorporates a bright, light gathering fiber optic rod that naturally draws the shooter's eye to the front post for quicker initial sight acquisition and faster sight recovery from shot-to-shot. In order to ensure the strength and integrity of their front sights, Kensight wire-EDM machines them from 4140 chrome moly steel and then heat treats the completed parts to a hardness of RC 38-40.
This competition front sight comes equipped with a 0.100" or 0.118" wide blade that is partially serrated for reduced glare. The 0.060" diameter fiber optic rod is protected by a unique front sight blade shape featuring a series of cutouts along the top and sides that allow the rod to gather ambient light while also shielding the fragile fiber optic tube from potentially damaging impacts. This sight's contoured base blends in nicely with most round-top or "carry melted" slide profiles, resulting in a clean looking installation that requires little (if any) filing to accomplish. Compatible with Novak type front sight dovetail cuts (0.330" x 65 degree x 0.075") as typically found on both customized and factory 1911 pistols.
Gunsmith installation recommended
Authentic Kensight ® Sights - The Professional's Choice
This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.
Limited Lifetime Warranty
We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.
Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.
All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.
After you obtain your RMA, Please send your product to:KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.
Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered.
- Product Series:
- DFS/DAS Novak Series
- 4140 Chrome Molly Steel
- Wire-EDM Machined
- Black Oxide
- Novak Dovetail:
- 0.330" x 65° x 0.075"
- Blade Type:
- Serrated, Patridge, 0.050" Fiber Optic Rod
- Blade Height:
- Blade Width:
- Sight Base:
Received my sights about a week ago and finally got to put them on. The adjustable Lpa cut rear fit my Springfield 1911 with very little fitting and was a quality sight. I decided on this front sight because the contour fits my slide perfectly. I am use to sights arriving pretty over size but this one didn't come as big as I would like and fittment worries me a little bit. Also the pin for my Springfield doesn't line up with the pin on the front of the sight and lastly both fiber optic rods supplied are too short which basically added more wait time to finishing up the install. Reply By Kensight: This is not the correct sight for your Springfield. This is our "standard" front sight with dovetail dimensions of .330x65 Degrees. Springfield front sights are .350x60 Degrees. This is why you were experiancing the fitment issues.
Easy fit due to proper machine by Kensight. Usually just a few file strokes to get them on nicely. I like using the 1/16 vertical hole, most of my guns have that from the factory /builder. The contoured base blends real nice on round top pistols, it's a great option.
Great sight overall. The build and finish were top notch. The only con was the sight dovetail was just undersized creating a non-interference fit.
Quality product. Slightly oversized allowing for a perfect fit with slight filing.
I like to spend my money on quality products, not junk. Thats what I got with Kensight. Following my purchase I had an opportunity to contact their customer service dept. and I was very impressed with how they responded.