Springfield - Tritium Night Sight w/ Arctic White Outline, Beveled Flat Base

Kensight Sights
Ships within one business day.
(No reviews yet)
Current Stock:

Springfield® Armory Ramped Front Night Sight. These highly visible front sights incorporate a self-illuminating Green Tritium Dot nestled within a bright Artic White Outline. The perfect combination that glows brightly in both low light and well-lit conditions. Based on studies and reviews, the extreme contrast helps quickly draw the shooter's eye to the front post, which allows quicker sight alignment and target acquisition.

This Front Night Sight comes equipped with a 0.140" wide blade and a beveled flat base that keeps the sight's dovetail uniform, resulting in a clean looking installation that requires little (if any) filing to accomplish. Compatible with the Springfield type front sight dovetail cut (0.340" x 60 Degree x 0.075")

Used on Springfield (1911's, EMP’s and some Range Officers), some model Colts and Dan Wesson’s that were made prior to January 2015 (the first two digits in the serial number are the year of manufacture). PLEASE MEASURE YOUR FRONT DOVETAIL BEFORE ORDERING. Please note: This front does not come standard in any sight set we offer.


Tritium Front Sights

Standard Dovetail - Flat Base vs Contoured Base

A front sight with dovetail dimensions of 0.330" (Width) x 65° (Angle) x 0.075" (Depth) has become known as a “standard” front sight in the industry. While these were first seen on 1911 slides with the Novak LoMount rear sight, some OEM manufactures have adopted this same size for their 1911 platform.

However, other 1911 platforms such as Springfield®, Colts, and Dan Wesson have a propitiatory dovetail. We offer two basic configurations of front sight bases. One is the “Flat Base” style and the other is the “Contoured Base”. The dovetail dimensions are both the same, so the base selection is a personal preference depending on the profile on the top of your 1911 slide. Please check your existing front sight dovetail dimensions, before purchasing the Springfield front dovetail sight.


Front Sight Height Guide



Authentic Kensight ® Sights - The Professional's Choice

This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.

P65 Warning   Make Your Mark  Export Warning


Limited Lifetime Warranty

We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.

Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.

Warranty Service

All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.

After you obtain your RMA, Please send your product to:

KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336

You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.

Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.

Product Series:
Springfield/Dan Wesson Series
4140 Chrome Molly Steel
Wire-EDM Machined
Black Oxide
Springfield Dovetail:
0.340" x 60° x 0.075"
Blade Type:
Smooth, Recessed, Beveled, 0.076" Tritium Dot
Blade Height:
Blade Width:
Outline Color:
Arctic White Outline
Sight Base: