Springfield ® 1911A1 Tenon Staked Patridge Front Sight - .150" TallKensight Sights
The Springfield Armory® tritium front night sight is a direct replacement for the 1911A1 with a fixed MIL-SPEC rear.
This sight is what is called a patridge style blade. It is ideal for target shooting because the rear of the blade is completely vertical. With the addition of a fully serrated blade, this combination gives the shooter a better sight picture because there is virtually no glare from the sun, as well as a good contrast between it and the rear sight. At just .150" tall, this front sight was made to pair with the Kensight item 860-202 but will work well with any standard fixed MIL-SPEC rear that is .330" wide x .115" tall.
The blade dimensions are .150" tall x .118" wide and has a .080" tenon to fit the Springfield Armory® 1911A1. The green tritium insert is made and installed by Cammenga®, is .077" in diameter and has a bright white outline made of PVC.
- General: Wire EDM Precision Machined
- Material: Sight made of 4140 Chrome Moly Steel and tritium made of MB Microtec (Switzerland) and supplied by Cammenga Corp
- Blade Dimensions: .150" tall x .118" wide (height to pair with a MIL-SPEC rear dovetail on a full size 1911 with a 5" barrel)
- Tritium Dimensions: .077" in diameter with a .015" thick white outline
- Front Sight Fits: Springfield 1911A1 .080" stake-in hole
BE CAREFUL ON THE INSTALL! The tritium tube inside of the sight IS GLASS and it can break.
BEFORE INSTALLATION - Inspect sight(s) immediately to verify that the tritium lamp is functioning. Any warranty claims for broken or dim tritium lamp(s) must be made prior to installation on your firearm. We will not be held responsible for breakage of tritium lamp(s) during the installation process. If you feel that the tritium lamp(s) in your sight is dim or non-functional in any way, you must contact our customer service department for warranty exchange or replacement before you attempt to install the sight, otherwise the warranty will be denied. No exceptions.
Authentic Kensight ® Sights - The Professional's Choice
This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.
Limited Lifetime Warranty
We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.
Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.
All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.
After you obtain your RMA, Please send your product to:KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.
Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.
This sight fit without any issues
Very good quality and fit perfect, this was my first staked on sight install and it went very smooth. Very good value.