California Proposition 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn more about Proposition 65 warnings (opens in a new window)
Kensight Springfield White Dot Rear, Serrated Blade W/ 0.200'' Tall White Dot CONTOURED base front
Kensight Sights
$119.95
(No reviews yet)
Write a Review
Kensight Sights
Kensight Springfield White Dot Rear, Serrated Blade W/ 0.200'' Tall White Dot CONTOURED base front
Kensight Gun Sights are used as original equipment for many of today's top manufacturers. This Kensight Springfield Rear Sight is Fully Adjustable for both Windage and Elevation, and is an ideal low profile sight upgrade for a concealed carry pistol due to its thoroughly dehorned exterior with no sharp edges to cut hands or catch on clothing during the draw stroke. The rear sight body is Wire-EDM machined from 4140 Chrome Moly Steel that is then heat treated to a hardness of RC 38-40, ensuring tight part-to-part fit and long-lasting durability. Click-adjustments are positive and precise, allowing for reliable and consistent point of impact changes.
This Kensight Springfield Rear Sight is equipped with a Partially Serrated Slanted Blade for reduced glare, and incorporates a High Visibility Arctic White Dot on either side of the sight notch that helps to funnel the shooter's attention toward the front sight post. This rear sight fits the popular Novak LoMount rear sight dovetail cut, often found on factory-produced Springfield and Dan Wesson (2015 and older) 1911 pistols.
This rear sight comes paired with our standard white dot contoured front sight with a serrated blade. For the front sight, blade heights from 0.150'' to 0.220'' are available but we recommend the .200 tall in most cases. Compatible with Springfield front sight dovetail cuts (0.340" x 60° x 0.075") as typically found factory-produced Springfield and Dan Wesson (2015 and older) 1911 pistols.
Novak® LoMount™ Dovetail Sight Cut
The Novak® LoMount™ dovetail is a somewhat standard dovetail sight cut found on many popular factory-fitted (OEM) and custom platforms. The Kensight® DAS™ (Defensive Adjustable Sights) and DFS™ (Defensive Fixed Sights) are the perfect low profile upgrade for your concealed carry, or combat carry pistols, due to a smooth, thoroughly "dehorned", low-profile exterior. The benefit of this feature is there are no sharp edges to cut hands or catch on clothing during the draw stroke which compliments your concealed carry or defensive style 1911. This particular sight will only fit an existing Novak® LoMount™ 1911 dovetail. If you unsure of your current dovetail configuration and would like to know more about dovetail styles, click the button below.
Add The Optional Front Sight
A front sight with dovetail dimensions of 0.330" (Width) x 65° (Angle) x 0.075" (Depth) has become known as a “standard” front sight in the industry. While these were first seen on 1911 slides with the Novak LoMount rear sight, other OEM manufactures have adopted this same size for their 1911 platform. There are two basic configurations of the “standard” front sight base. One is the “Flat Base” style and the other is the “Contoured Base”. The dovetail dimensions are both the same, so the base selection is a personal preference depending on the profile on the top of your 1911 slide. We recommend that you check your existing front sight dovetail dimensions, before purchasing the standard front sight.
DAS™ Suggested Front Sight Height
The front sight height will greatly vary depending on your rear sight selection. Most of the Kensight DAS˜ (Defensive Adjustable Sights) will require a front sight height of 0.190” - 0.200” tall. We ship most of our DAS sight sets with the recommended 0.200” tall front sight. In some cases your existing front sight may work, but this could limit the amount of elevation adjust-ability in the rear sight. If you would like to learn more about front sight heights, visit our Front Sight Height Guide.
Compatible With Many of Today's Top Manufacturers
Our sights are compatible with many factory-produced and custom 1911 pistols. The Kensight DAS and DFS line of sights will fit certain models of Springfield Armory, Colt, Wilson Combat, STI International, Les Baer Custom, Rock River Arms, Dan Wesson 1911s and many others which include the Novak LoMount Dovetail sight cut. For a complete list, See our manufactures page. Most of these manufactures offer both a target style 1911, and a carry style, which include the Novak LoMount Dovetail cut. Click on the manufacture’s Logo below to see all styles of Kensight Sights available for your particular 1911 platform.
- Product Series:
- Springfield Series
- Material:
- 4140 Chrome Molly Steel
- Color:
- Black
- Construction:
- Wire-EDM Machined
- Finish:
- Black Oxide
- Springfield Dovetail:
- 0.495" x 65° x 0.125"
- Elevation Adjustment:
- Click Adjustment
- Windage Adjustment:
- Click Adjustment
- Rear Blade Type:
- Slanted, Serrated, 0.080" Arctic White Dots
- Rear Blade Notch:
- 0.100" Deep
- Front Blade Type:
- Smooth, Ramped, 0.080" Arctic White Dot
- Front Blade Height:
- 0.200"
- Front Blade Width:
- 0.115"
- Front Sight Base:
- Contoured
Authentic Kensight® Sights: Built for Precision
Every authentic Kensight® sight is built to exacting standards for precision, durability, and reliable performance. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. This precision manufacturing process allows us to maintain tight tolerances for smooth adjustments, positive audible clicks for windage and elevation, and consistent dovetail dimensions. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are trusted by OEM manufacturers, competition shooters, and firearms professionals worldwide.
Important Product, Warranty, and Purchase Information
U.S. Export Notice
This product may be subject to U.S. export controls and licensing requirements. Unauthorized export, re-export, transfer, or disclosure may be prohibited.
Learn more about U.S. export requirements (opens in a new window)
Limited Lifetime Warranty
Eligible KFS-manufactured products are covered by a Limited Lifetime Warranty against defects in materials and workmanship under normal and intended use. Coverage is subject to the complete Warranty Policy, including its eligibility requirements, exclusions, limitations, claim procedures, and available remedies.
Terms & Privacy
By using this website or placing an order, you agree to our Terms and Conditions and acknowledge our Privacy Policy. Please review both before completing your purchase.
