Kensight Front Sight Blade Trijicon Tritium insert - Night Sights Contoured BaseKensight Sights
This Kensight Front Night Sight incorporates a self-luminous Trijicon Green Tritium Dot nestled within a High Visibility White Dot and glows brightly in low light conditions to help draw the shooter's eye to the front post far quicker than traditional iron or fiber optic front sights. In order to ensure the strength and integrity of our sights, Kensight Wire-EDM machines them from 4140 Chrome Moly Steel and then heat treats the completed parts to a hardness of RC 38-40.
This Front Night Sight comes equipped with a 0.115" Wide Blade and a Contoured Base that blends in nicely with most round-top or "carry melted" slide profiles, resulting in a clean looking installation that requires little (if any) filing to accomplish. Compatible with Novak type front sight dovetail cuts (0.330" x 65 Degree x 0.075") as typically found on both customized and factory 1911 pistols.
Gunsmith installation recommended
Authentic Kensight ® Sights - The Professional's Choice
This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.
Limited Lifetime Warranty
We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.
Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.
All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.
After you obtain your RMA, Please send your product to:KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.
Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.
- Product Series:
- DFS/DAS Novak Series
- 4140 Chrome Molly Steel
- Wire-EDM Machined
- Black Oxide
- Novak Dovetail:
- 0.330" x 65° x 0.075"
- Blade Type:
- Smooth, Recessed, 0.076" Tritium Dot
- Blade Height:
- Blade Width:
- Sight Base:
Great fit, easy to install. Only had to open cut by another .004 for a nice tight fit. Dot is bright and easy to find.
Great sight as all of Kensights are. Fit my Nighthawk perfectly.
Perfect fit installation took some fitting I expected clearly a superior product.
Nice sight, however; I ordered a standard dovetail which springfield said that is what my range officer has. Standard dovetail on the Kensight was very loose and the roll pin holes did not align. Gunsmith pinged the dovetail and the base of the dovetail on the slide and got a nice tight fit then drilled another hole for the roll pin and achieved a nice secure install. The roll pin was also to long and had to be shortened and cleaned up after being installed. Thank goodness for experienced gunsmiths because this was not an average joes install!