Kensight ® Adjustable Carry Glock ® Front and Rear Sight Set For The Small Frame Glock, .315" Front (960-817)Kensight Sights
We all know the factory Glock® sights leave more to be desired. In addition, the proprietary fixed sight dovetail, placed at the very rear of the slide, is small, shallow and not generally seen as ideal for an adjustable sight. Knowing this, Kensight has designed this front and rear sight set specifically for the FULL SIZE, SMALL FRAME Glock pistols. This fully adjustable rear, Kensight Item# 860-817, utilizes the small, shallow factory dovetail so no sight or slide cutting is required. It is precise and practical, well-built and able to withstand a lifetime of use. Because it is a fairly tall sight that sits completely on top of the side, a front sight with a minimum height of .315” is absolutely necessary. This is why Kensight had beveled the rear blade to prevent snagging and to protect the shooters hands. The rear sight is fully adjustable for windage and elevation. With positive clicks, a simple turn of the screw will let you dial it in to shoot at any reasonable distance. Not only is the sight highly effective and easy to use, it looks good too! Knowledgeable shooters will note that our rear sight blade does not extend past the rear of the slide like many other adjustables that can extend 1/4" past the slide, putting your hands and clothes at risk.
This sight set’s front, Kensight item# 870-927, is fully serrated, .100” wide and .315” tall, the minimum required for the fully adjustable rear but still offers complete elevation adjustability. Very simple to install, it is held in with a screw that is provided with this set. Just like the dovetailed rear, no sight or slide modification is necessary.
PISTOL COMPATIBILITY, FRONT AND REAR SIGHT: FULL SIZE, SMALL FRAME
*Please see Kensight Item# 970-817 or 980-817 for long slides
- 9mm: G17, G19, G26, G43
- .40: G22, G23, G25, G27
- .380: G25, G28, G42
- Material: 4140 Chrome Moly Steel
- Finish: Black Oxide
- Rear Sight Blade Type: Fully Serrated, Beveled,
- Rear Notch Width: .118” wide x .100” deep
- Front Sight Blade Height: .315”
- Front Sight Blade Size: .100"
- Sight Dovetail: Factory Glock Rear Dovetail
- 970-817: Kensight® Adjustable Target Front and Rear Sight Set for the Full Size, Small Frame Glock, .330” Tall Front Sight
- 980-817: Kensight® Adjustable Target Front and Rear Sight Set for the Full Size, Small Frame Glock, .350” Tall Front Sight
- 960-793: Kensight® Adjustable Target Front and Rear Tritium Night Sight Set for the Full Size, Small Frame Glock, .330” Tall Front Sight
- 960-821: Kensight® Adjustable Target Front and Rear Sight Set for the Full Size, Large Frame Glock, .315” Tall Front Sight
Authentic Kensight ® Sights - The Professional's Choice
This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.
Limited Lifetime Warranty
We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.
Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.
All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.
After you obtain your RMA, Please send your product to:KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.
Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.
As an old service pistol shooter I saw the Kensight products on our 1911s in the 70s and 80s. This sight for the Glock is just the same. As good as it gets!
I ordered these sights for my wife's Glock model 34. I was very impressed with the quality of the sights. These are solid sights for a great price. I'm sure she will like them as well.....she has to wait because this build is her run for our wedding anniversary!