DAS ® - Defensive Adjustable Sight, Fully adjustable bar-dot-bar tritium rear sight fits Novak ® LoMount cut, w/serrations - .230" Tall FLAT BASE Front SightKensight Sights
This Kensight DAS (Defensive Adjustable Sight) Rear Night Sight is fully adjustable for both windage and elevation. This makes our sight a versatile sight upgrade for concealed carry, or duty pistols, that may also see use in competition or target shooting endeavors. The windage and elevation click-adjustments are positive and precise, allowing reliable and consistent POI (point of impact) adjustments on the fly.
This Kensight Rear Night Sight is equipped with a partially serrated slanted blade for reduced glare, which incorporates two self-luminous Green Tritium Lamps nestled within two High Visibility White Dots for a 3-dot sight picture that's quick and easy to acquire. The combination of the Tritium, and White Dots, allow the sights to be equally useful in both low light, or daylight conditions.
This rear sight comes paired with our standard tritium flat base front sight with a serrated blade. The set is sold with a 0.200'' tall blade but blade heights from 0.150'' to 0.220'' are available upon request. Compatible with Novak type front sight dovetail cuts (0.330" x 65° x 0.075") as typically found on both customized and factory 1911 pistols.
The Kensight DAS fits the popular Novak LoMount rear sight dovetail often found on many factory-produced and custom 1911 pistols.
- Material: 4140 Chrome Moly Steel
- Blade Type: Slanted, Serrated w/2 High Visibility Green Tritium Bars
- Rear Sight Dovetail: Novak LoMount ( 0.495" x 65° )
- Windage Click-Adjustment: Yes
- Elevation Click-Adjustment: Yes
NOTE: The rear sight sits a little higher than our standard adjustable sight, and requires a minimum front sight height of 0.230" tall.
Novak® LoMount™ Dovetail Sight Cut
The Novak® LoMount™ dovetail is a somewhat standard dovetail sight cut found on many popular factory-fitted (OEM) and custom platforms. The Kensight® DAS™ (Defensive Adjustable Sights) and DFS™ (Defensive Fixed Sights) are the perfect low profile upgrade for your concealed carry, or combat carry pistols, due to a smooth, thoroughly "dehorned", low-profile exterior. The benefit of this feature is there are no sharp edges to cut hands or catch on clothing during the draw stroke which compliments your concealed carry or defensive style 1911. This particular sight will only fit an existing Novak® LoMount™ 1911 dovetail. If you unsure of your current dovetail configuration and would like to know more about dovetail styles, click the button below.
Authentic Kensight ® Sights - The Professional's Choice
This is an authentic Kensight ® sight, and not to be confused with other brands. When it comes to durability, and features the Kensight® sights far exceed our competitors. Our sights are Wire-EDM machined from a single billet of 4140 chrome-moly steel. The result is a precision sight built with better materials and the Wire-EDM construction ensures the tightest tolerances possible. This translates to ultra-smooth adjustments, audible clicks for both windage and elevation, and consistent dovetail dimensions in which the "industry standard" CNC construction cannot compete. Backed by our Limited Lifetime Warranty, Kensight 1911 sights are premium quality and the first choice for factory-fit OEM manufactures, competition shooters and professional's worldwide.
Limited Lifetime Warranty
We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.
Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.
All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.
After you obtain your RMA, Please send your product to:KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.
Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.